TractorDex
TractorDexIndex
New HollandUSARéférence du catalogue

New Holland T9060

Traduction française indisponible ; contenu anglais affiché.

Années de production: 2007–2010 • Usine d’assemblage: Fargo, North Dakota, USA

Puissance moteur
535 HP
PDF : 473 ch
Cylindrée
15 L
Moteur 6 cylindres
Entraînement et châssis
4WD
Full power shift (16F/2R)
Poids en ordre de marche
24,494 kg
54,000 lbs

Sources et preuves par champ

Cette fiche importée ne contient pas encore de preuves au niveau des champs.

ARCHIVE SPEC4WD
535HP
New HollandT9060
Official Technical Blueprint Record

Ask TractorDex AI Copilot About T9060

Instant technical consultation powered by heavy machinery knowledge

Engineering & Capability Benchmark

Specific output, tractive ratio, and segment percentile

Class 9+ Heavy Draft Titan
Global Tractor Fleet Power SpectrumTop 7% of all indexed machinery
Compact (20 HP)Utility (100 HP)Row-Crop (250 HP)Titans (600+ HP)
Specific Output
35.7 HP/L
Turbocharged & Aftercooled
Traction Ratio
45.8 kg/HP
Heavy ballast for draft pull
PTO Efficiency
88%
473 PTO HP rated
Hydraulic Flow
42 GPM
159 L/min capacity

Caractéristiques du moteur et de la puissance

Modèle du moteur
Cummins QSX15
Carburant
Diesel
Puissance nominale
535 hp
Rated PTO Power
473 hp (New Holland specification)
Cylindres
6
Cylindrée
15 L (915 ci)
Alésage / course
5.4x6.7 inches 137 x 170 mm
Régime nominal
2100 RPM
Capacité d’huile moteur
52 qts (~49.2 L)
Capacité de liquide de refroidissement
84.4 qts (~79.8 L)

Maintenance picks for the T9060

Oil capacity 52 qts — match the filter before you drain.

Caractéristiques de transmission et de châssis

Type de transmission
Full power shift (16F/2R)
Rapports (avant / arrière)
16 avant / 2 arrière
Système d’entraînement
4WD
Empattement
154 in
Pneu avant
710/70R42
Pneu arrière
710/70R42
Débit hydraulique
42 GPM
Attelage arrière
IVN (optional)
ASABE EP496 Engineering Matcher

Implement Draft & Ballast Matcher

Simulate draft resistance, drawbar power transfer, and optimal axle weight distribution for New Holland T9060.

Optimal Power Match(58%)
CAD DRAFT SCHEMATIC • Deep In-Line Ripper
SOIL: Medium Tilled LoamDEPTH: 14"SPEED: 5 MPH58% LOAD
SOIL SURFACE (0.0")SUB-SURFACE PLOW PAN (~14")535 HP◄ 18,081 LBS DRAFT14" DEPTH
DRAWBAR DEMAND: 241.1 HPWIDTH / SIZE: 7 Shanks
ASABE D497.7 Tillage Specific Resistance Formula
Implement Size (Shanks)7 Shanks
3 ShanksDefault: 717 Shanks
Tillage / Seeding Depth14 inches (36 cm)
8"Target: 14"20"
Target Operating Field Speed5.0 mph (8 km/h)
3.5 mphRated: 5 mph6.5 mph
Engine Power Demand vs Rated Output309.1 HP / 535 HP Rated
0%55% (Min Load)60-85% (Sweet Spot)100% (Cap)
Draft Force
18,081 lbs
Drawbar Power
241.1 HP
Target Slip
8% - 12%
Axle Ballast Balance (4WD Articulated Wheeled )Calibrated for Deep In-Line Ripper / Subsoiler (135 lbs/HP standard)
Target: 70,200 lbs
(Est. Structural Cap)
Capped at Estimated Structural Ceiling (70,200 lbs)

Theoretical draft formula suggests 72,225 lbs. Official manufacturer GVWR is unrecorded for this catalog entry, so target weight is constrained to an engineering structural estimate (~135% of base operating weight) to prevent chassis overload.

Front Axle: 53%Rear Axle: 47%
16,876 kg (37,206 lbs)14,966 kg (32,994 lbs)
Ballast Adjustment vs Base:+16,200 lbs (7,348 kg)
Hourly Diesel Burn
13.6 gal/h
51.5 L/hr (est. $52/h)
Hydraulic Fan Status
Standard Draw
No fan req

Optimal engine load (58%). Tractive efficiency is peaked within standard 8% - 12% slip window.

Tractor is currently light for this heavy draft tool. Add ~7348 kg (16,200 lbs) ballast to prevent tire slip and premature wear.

Target ballast is capped at 70,200 lbs based on structural engineering estimate (~135% base weight; official manufacturer GVWR unrecorded). Avoid adding excess ballast beyond this benchmark to protect axle bearings and chassis.

Instant Used Market Valuation Projector

Algorithmic resale estimate for New Holland T9060 (2007)

Full Appraisal Tool
Operating Meter Hours3,200 hrs
Mechanical & Physical Condition
Empirical model calibrated against dealer & auction lots
Estimated Fair Market Value
$168,883
Basis: 535 HP • 19 yrs old
Auction / Wholesale
$138,484 – $155,372
Dealer Retail Asking
$177,327 – $199,282
3-Year Projected Resale Curve~5% annual retention decay
Year 2027
$160,439
Year 2028
$152,417
Year 2029
$144,796

Direct Segment Rivals & Showdowns

Head-to-head match-ups calibrated by horsepower and era

Claas-11 HP
Xerion 5000
524 HP• 2009 -
CaseIH-35 HP
STX500
500 HP
Claas-52 HP
Xerion 4500
483 HP• 2009 -

Looking for a used New Holland T9060?

Browse live listings and auction results near you.

New Holland

USA • 432 Models

New Holland is a prominent global manufacturer of agricultural machinery with a rich history dating back to 1895 when it was originally established as the New Holland Machine Company in New Holland, Pennsylvania. Today, the company is headquartered in Turin, Italy, and operates as a subsidiary of CNH Industrial N.V., a multinational corporation based in the Netherlands. New Holland has established itself as a full-line manufacturer, offering a comprehensive range of agricultural equipment including tractors, combine harvesters, balers, forage harvesters, self-propelled sprayers, haying tools, seeding equipment, utility vehicles, and specialized machinery such as grape harvesters. The brand is recognized for its innovative technologies, with trademarked systems like the ABS Super Steer, Opti Fan System, and Intellifill system enhancing its product offerings. New Holland's global manufacturing footprint includes 18 plants and six joint ventures across the Americas, Asia, and the Middle East, reflecting its commitment to serving diverse agricultural markets worldwide. The company's administrative headquarters in Turin and its North American operations based in New Holland, Pennsylvania, underscore its international presence and dedication to both innovation and quality in agricultural machinery.

View Full New Holland Lineup