TractorDex
TractorDexIndex
ValmetFinlandRéférence du catalogue

Valmet 8600

Traduction française indisponible ; contenu anglais affiché.

Années de production: 1989–1994

Puissance moteur
170 HP
—
Cylindrée
7.4 L
Moteur 6 cylindres
Entraînement et châssis
4WD
Two-speed power shift (16-speed)
Poids en ordre de marche
6,019 kg
13,270 lbs

Sources et preuves par champ

Cette fiche importée ne contient pas encore de preuves au niveau des champs.

Valmet 8600
VLM Verified Authentic
Valmet 8600

Ask TractorDex AI Copilot About 8600

Instant technical consultation powered by heavy machinery knowledge

Engineering & Capability Benchmark

Specific output, tractive ratio, and segment percentile

Row-Crop / Mid-Range Field
Global Tractor Fleet Power SpectrumTop 45% of all indexed machinery
Compact (20 HP)Utility (100 HP)Row-Crop (250 HP)Titans (600+ HP)
Specific Output
23.0 HP/L
Turbocharged
Traction Ratio
35.4 kg/HP
Agile transport & crop care
PTO Efficiency
—
Mechanical driveline
Hydraulic Flow
Standard
Auxiliary implement ports

Caractéristiques du moteur et de la puissance

Modèle du moteur
SisuDiesel 612DS
Carburant
Diesel
Puissance nominale
170 hp
Rated PTO Power
N/A (Valmet specification)
Cylindres
6
Cylindrée
7.4 L (449.6 ci)
Alésage / course
4.252x5.276 inches 108 x 134 mm
Régime nominal
2200 RPM
Capacité d’huile moteur
N/A
Capacité de liquide de refroidissement
N/A

Maintenance picks for the 8600

Filters, oil and common wear parts for this model.

Caractéristiques de transmission et de châssis

Type de transmission
Two-speed power shift (16-speed)
Rapports (avant / arrière)
16 avant
Système d’entraînement
4WD
Empattement
115.4 in
Pneu avant
16.9R28
Pneu arrière
20.8R38
Débit hydraulique
N/A
Attelage arrière
N/A
ASABE EP496 Engineering Matcher

Implement Draft & Ballast Matcher

Simulate draft resistance, drawbar power transfer, and optimal axle weight distribution for Valmet 8600.

Overloaded / Wheel Slip Alert(175%)
CAD DRAFT SCHEMATIC • High-Speed Compact Disk Harrow
SOIL: Medium Tilled LoamDEPTH: 4"SPEED: 8 MPH175% LOAD
SOIL SURFACE (0.0")SUB-SURFACE PLOW PAN (~14")170 HP◄ 10,895 LBS DRAFT4" DEPTH
DRAWBAR DEMAND: 232.4 HPWIDTH / SIZE: 26 ft Width
ASABE D497.7 Tillage Specific Resistance Formula
Implement Size (ft Width)26 ft Width
12 ft WidthDefault: 3050 ft Width
Tillage / Seeding Depth4 inches (10 cm)
2"Target: 4"7"
Target Operating Field Speed8.0 mph (12.9 km/h)
6 mphRated: 8 mph10.5 mph
Engine Power Demand vs Rated Output297.9 HP / 170 HP Rated
0%55% (Min Load)60-85% (Sweet Spot)100% (Cap)
Draft Force
10,895 lbs
Drawbar Power
232.4 HP
Target Slip
8% - 12%
Axle Ballast Balance (MFWD / Mechanical Front Assist )Calibrated for High-Speed Compact Disk Harrow (115 lbs/HP standard)
Target: 17,915 lbs
(Est. Structural Cap)
Capped at Estimated Structural Ceiling (17,915 lbs)

Theoretical draft formula suggests 19,550 lbs. Official manufacturer GVWR is unrecorded for this catalog entry, so target weight is constrained to an engineering structural estimate (~135% of base operating weight) to prevent chassis overload.

Front Axle: 38%Rear Axle: 62%
3,088 kg (6,808 lbs)5,038 kg (11,107 lbs)
Ballast Adjustment vs Base:+4,645 lbs (2,107 kg)
Hourly Diesel Burn
7.9 gal/h
29.9 L/hr (est. $30/h)
Hydraulic Fan Status
Standard Draw
No fan req

Engine demand (297.9 HP) exceeds rated power (170 HP). Reduce working speed by 1.0-1.5 mph or reduce working width.

Tractor is currently light for this heavy draft tool. Add ~2107 kg (4,645 lbs) ballast to prevent tire slip and premature wear.

Target ballast is capped at 17,915 lbs based on structural engineering estimate (~135% base weight; official manufacturer GVWR unrecorded). Avoid adding excess ballast beyond this benchmark to protect axle bearings and chassis.

Instant Used Market Valuation Projector

Algorithmic resale estimate for Valmet 8600 (1989)

Full Appraisal Tool
Operating Meter Hours3,200 hrs
Mechanical & Physical Condition
Empirical model calibrated against dealer & auction lots
Estimated Fair Market Value
$16,048
Basis: 170 HP • 37 yrs old
Auction / Wholesale
$13,159 – $14,764
Dealer Retail Asking
$16,850 – $18,937
3-Year Projected Resale Curve~5% annual retention decay
Year 2027
$15,246
Year 2028
$14,483
Year 2029
$13,759

Direct Segment Rivals & Showdowns

Head-to-head match-ups calibrated by horsepower and era

White+24 HP
6175
194 HP
AGCO Allis+24 HP
9670
194 HP
AGCO Allis+24 HP
9675
194 HP

Looking for a used Valmet 8600?

Browse live listings and auction results near you.

Valmet

Finland • 87 Models

Valmet, originally known as Valtion Metallitehdas (State Metal Factory), was a Finnish industrial powerhouse with roots in arms manufacturing before transitioning into the agricultural machinery sector. Founded in 1920, Valmet initially focused on producing military equipment and machinery for Finland's defense needs. The company's foray into the tractor market began in 1951, marking a pivotal shift in its business strategy. Valmet quickly gained recognition for its robust and reliable tractors, which were designed to withstand the harsh Nordic climate. By 1958, the company had expanded its reach internationally, exporting tractors to various countries. A significant milestone in Valmet's history was the establishment of a factory in Brazil in 1960, which underscored its commitment to global growth and diversification. In 1979, Valmet entered into a strategic partnership with Volvo, forming the Volvo BM Valmet brand, which further strengthened its presence in the global tractor market. Valmet acquired Volvo's share in 1985, consolidating its position as a leading tractor manufacturer. The company also collaborated with Massey-Ferguson, producing tractors at Massey's factory in France, which demonstrated its ability to adapt and thrive in a competitive industry. Valmet remained a government-owned entity until 1993, when it merged with Sisu, a Finnish truck manufacturer. As part of this merger, the Valmet name was gradually phased out and replaced by Valtra, a brand that had already been associated with Valmet's implements and forestry machinery. Today, while the Valmet name has been largely absorbed into Valtra and other entities, its legacy lives on in the technologies and industrial solutions provided by Valmet Oyj, a global leader in process technologies, automation systems, and services for industries such as pulp, energy, and automotive manufacturing.

View Full Valmet Lineup