TractorDex
TractorDexIndex
ChamberlainAustraliaCatalog archive

Chamberlain Super 70

Production years: 1954–1963

Compare with other modelsValue machine
Engine horsepower
72 HP
—
Displacement
3.5 L
3-cylinder engine
Drive and chassis
2WD
Sliding gear (9F/3R)
Operating weight
4,399 kg
9,700 lbs

Sources and field evidence

Catalog Archive: Baseline specifications compiled from historical manufacturer archives and equipment registries. Laboratory test report verification in progress.

Chamberlain Super 70
VLM Verified Authentic
Chamberlain Super 70

Ask TractorDex AI Copilot About Super 70

Instant technical consultation powered by heavy machinery knowledge

Engineering & Capability Benchmark

Specific output, tractive ratio, and segment percentile

Utility & Farmyard Workhorse
Global Tractor Fleet Power SpectrumTop 73% of all indexed machinery
Compact (20 HP)Utility (100 HP)Row-Crop (250 HP)Titans (600+ HP)
Specific Output
20.6 HP/L
Aspiration: Unknown
Traction Ratio
61.1 kg/HP
Heavy ballast for draft pull
PTO Efficiency
—
Mechanical driveline
Hydraulic Flow
Standard
Auxiliary implement ports

Engine and power specifications

Engine model
Detroit Diesel 3-71
Fuel type
Diesel
Rated horsepower
72 hp
Rated PTO Power
N/A (Chamberlain specification)
Drawbar Power @ Rated Engine Speed
52.5 hp (Nebraska OECD Test 2218)
Cylinders
3
Displacement
3.5 L (213 ci)
Bore / stroke
4.25x5.00 inches 108 x 127 mm
Rated RPM
1500 RPM
Crankcase oil capacity
N/A
Coolant capacity
N/A

Maintenance picks for the Super 70

Filters, oil and common wear parts for this model.

Transmission and chassis specifications

Transmission type
Sliding gear (9F/3R)
Gears (forward / reverse)
9 forward / 3 reverse
Drive system
2WD
Wheelbase
83 in
Front tire
7.50x18
Rear tire
23.1x26
Hydraulic flow
N/A
Rear hitch
N/A
ASABE EP496 Engineering Matcher

Implement Draft & Ballast Matcher

Simulate draft resistance, drawbar power transfer, and optimal axle weight distribution for Chamberlain Super 70.

Overloaded / Wheel Slip Alert(116%)
CAD DRAFT SCHEMATIC • Wide-Span Field Cultivator
SOIL: Medium Tilled LoamDEPTH: 4"SPEED: 7 MPH116% LOAD
SOIL SURFACE (0.0")SUB-SURFACE PLOW PAN (~14")72 HP◄ 3,129 LBS DRAFT4" DEPTH
DRAWBAR DEMAND: 58.4 HPWIDTH / SIZE: 18 ft Width
ASABE D497.7 Tillage Specific Resistance Formula
Implement Size (ft Width)18 ft Width
18 ft WidthDefault: 4270 ft Width
Tillage / Seeding Depth4 inches (10 cm)
2"Target: 4"6"
Target Operating Field Speed7.0 mph (11.3 km/h)
5 mphRated: 7 mph9 mph
Engine Power Demand vs Rated Output83.4 HP / 72 HP Rated
0%55% (Min Load)60-85% (Sweet Spot)100% (Cap)
Draft Force
3,129 lbs
Drawbar Power
58.4 HP
Target Slip
8% - 12%
Axle Ballast Balance (2WD Standard Utility )Calibrated for Wide-Span Field Cultivator (100 lbs/HP standard)
Target: 7,200 lbs
Front Axle: 28%Rear Axle: 72%
914 kg (2,016 lbs)2,351 kg (5,184 lbs)
Ballast Adjustment vs Base:-2,500 lbs (-1,134 kg)
Hourly Diesel Burn
3.3 gal/h
12.5 L/hr (est. $13/h)
Hydraulic Fan Status
Standard Draw
No fan req

Engine demand (83.4 HP) exceeds rated power (72 HP). Reduce working speed by 1.0-1.5 mph or reduce working width.

Instant Used Market Valuation Projector

Algorithmic resale estimate for Chamberlain Super 70 (1954)

Full Appraisal Tool
Operating Meter Hours3,200 hrs
Mechanical & Physical Condition
Empirical model calibrated against dealer & auction lots
Estimated Fair Market Value
$3,246
Basis: 72 HP • 72 yrs old
Auction / Wholesale
$2,662 – $2,986
Dealer Retail Asking
$3,408 – $3,830
3-Year Projected Resale Curve~5% annual retention decay
Year 2027
$3,084
Year 2028
$2,930
Year 2029
$2,783

Direct Segment Rivals & Showdowns

Head-to-head match-ups calibrated by horsepower and era

International Harvester+8 HP
TD-14A
80 HP

Looking for a used Chamberlain Super 70?

Browse live listings and auction results near you.

Chamberlain

Australia • 26 Models

Chamberlain is an Australian agricultural machinery brand with roots tracing back to Welshpool, Western Australia, where it was established in an old armament factory. The brand initially gained recognition for its robust and reliable tractors designed to meet the demanding needs of the Australian agricultural sector. Chamberlain's early success was marked by its ability to produce machinery that could withstand the harsh conditions of the Australian outback. In 1970, the brand caught the attention of Deere & Company, which initiated an acquisition process. This strategic move by Deere led to the integration of John Deere engines into some Chamberlain models, signifying a significant technological advancement for the brand. The influence of John Deere became even more pronounced in 1975 with the launch of the 'Sedan 80' series, which bore design elements inspired by its American counterpart. By 1985, Chamberlain tractors were being painted in the iconic John Deere green, although they retained the Chamberlain name. However, this collaboration was short-lived, as Deere ceased tractor production at the Welshpool factory in 1986. The company then shifted to importing Deere tractors from other factories, marking the beginning of the end for Chamberlain's independent manufacturing operations. Chamberlain's legacy is characterized by its contribution to the development of durable and efficient tractors tailored to the unique challenges of Australian farming.

View Full Chamberlain Lineup